AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

Skontaktuj się z nami

AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2

Inne filmy

November 29, 2022

Połączenie kategorii: Plug Socket Tester

Skontaktuj się z nami

Znaków:

#tester gniazda zasilania #sprzęt do badania twardości #tester gniazd elektrycznych

Krótki: Discover the AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2, designed to test flat pins of plugs rated up to 15A. This video explains the pin bending test procedure, including force application, cycle details, and post-test inspection requirements.

Powiązane cechy produktu:

Tests flat pins of plugs rated up to and including 15A according to AS/NZS 3112:2011 Clause 2.13.7.2.
Applies a bending force 14 ±0.5 mm from the plug face, parallel to the plug face.
Simulates damage from walking on plugs and bending pins back straight.
Requires 20 complete cycles of force application per pin.
Each cycle includes a 7.5 ±0.3 mm travel distance at a maximum speed of 50 mm/s.
Post-test inspection ensures pins are not broken off, with allowances for minor cracking.
Includes detailed figures and diagrams for accurate test setup and execution.
Complies with international standards for plug and socket safety testing.

Często zadawane pytania:

What is the purpose of the pin bending test in AS/NZS 3112:2011?

The pin bending test simulates damage that may occur when a plug is walked on and bent pins are straightened, ensuring the pins can withstand such forces without breaking.
How many cycles are required for the pin bending test?

The test requires 20 complete cycles of force application per pin, with each cycle consisting of two movements (to the end point and back to the starting point).
What are the key parameters for applying force during the test?

The force is applied 14 ±0.5 mm from the plug face, parallel to the plug face, with a travel distance of 7.5 ±0.3 mm at a maximum speed of 50 mm/s.