logo
Wyślij wiadomość
produkty
szczegółowe informacje o produktach
Dom > produkty >
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4

IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4

MOQ: 1
Cena £: To be quoted
standardowe opakowanie: bezpieczne opakowanie kartonowe lub pudełko ze sklejki
Okres dostawy: 25 dni roboczych
metoda płatności: T/T
Pojemność dostaw: 3-5 zestawów miesięcznie
Szczegółowe informacje
Miejsce pochodzenia
Chiny
Nazwa handlowa
kingpo
Orzecznictwo
iso9001 ce
Place of origin:
Guangdong,China(mainland)
Standard:
IEC 60529
spray hole angle:
60°
time for one complete oscillation (2 x 120°):
4s
test duration:
5 min
maximum acceptable radius of the oscillating tube:
1600mm
Podkreślić:

rain test equipment

,

rain test chamber

Opis produktu

 

IEC 60529 Oscillating Tube Tester, IPX3/IPX4

 

Product infomation

 

The test is made using one of the two test device described in figure 4 and in figure 5 in accordance with the relevant product standard.
a) Conditions when using the test device as in figure 4(oscillating tube)
the total flow rate is adjusted as specified in table 9 and is measured with a flow meter.
The oscillating tube is provided with spray holes over an arc of 60°either side of the centre point. The support is not preforated.
The enclosure to be tested is placed at the centre point of the semicircle. The tube is caused to oscillate through an angle of 120°, 60°on either side of the vertical, the time for one complete oscillation (2 x 120°)being about 4s and the test duration being 5 min.
The enclosure is then turned through an horizontal angle of 90°and the test is continued for a further 5 min.
The maximum acceptable radius of the oscillating tube is 1600mm.
If for certain types of apparatus it is not possible to wet all parts of the enclosure undere test, the support of the enclosure may be moved up or down. The hand-held test device as in figure 5(spray nozzle) should be used as a preference in such cases.
 
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 0
KP-IPX3001
 
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 1
KP-IPX3002
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 2
produkty
szczegółowe informacje o produktach
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4
MOQ: 1
Cena £: To be quoted
standardowe opakowanie: bezpieczne opakowanie kartonowe lub pudełko ze sklejki
Okres dostawy: 25 dni roboczych
metoda płatności: T/T
Pojemność dostaw: 3-5 zestawów miesięcznie
Szczegółowe informacje
Miejsce pochodzenia
Chiny
Nazwa handlowa
kingpo
Orzecznictwo
iso9001 ce
Place of origin:
Guangdong,China(mainland)
Standard:
IEC 60529
spray hole angle:
60°
time for one complete oscillation (2 x 120°):
4s
test duration:
5 min
maximum acceptable radius of the oscillating tube:
1600mm
Minimum Order Quantity:
1
Cena:
To be quoted
Szczegóły pakowania:
bezpieczne opakowanie kartonowe lub pudełko ze sklejki
Czas dostawy:
25 dni roboczych
Payment Terms:
T/T
Możliwość Supply:
3-5 zestawów miesięcznie
Podkreślić

rain test equipment

,

rain test chamber

Opis produktu

 

IEC 60529 Oscillating Tube Tester, IPX3/IPX4

 

Product infomation

 

The test is made using one of the two test device described in figure 4 and in figure 5 in accordance with the relevant product standard.
a) Conditions when using the test device as in figure 4(oscillating tube)
the total flow rate is adjusted as specified in table 9 and is measured with a flow meter.
The oscillating tube is provided with spray holes over an arc of 60°either side of the centre point. The support is not preforated.
The enclosure to be tested is placed at the centre point of the semicircle. The tube is caused to oscillate through an angle of 120°, 60°on either side of the vertical, the time for one complete oscillation (2 x 120°)being about 4s and the test duration being 5 min.
The enclosure is then turned through an horizontal angle of 90°and the test is continued for a further 5 min.
The maximum acceptable radius of the oscillating tube is 1600mm.
If for certain types of apparatus it is not possible to wet all parts of the enclosure undere test, the support of the enclosure may be moved up or down. The hand-held test device as in figure 5(spray nozzle) should be used as a preference in such cases.
 
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 0
KP-IPX3001
 
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 1
KP-IPX3002
IEC 60529 IP Testing Equipment Oscillating Tube Tester IPX3 / IPX4 2